HAKE-RD-01 Regional Radiation Monitoring System

The HAKE-RD-01 regional radiation monitoring system mainly consists of a separate instrument: an online radiation dose controller RDU57 (hereinafter referred to as the controller) and an online radiation dose monitor RP32GM or RP75PS (hereinafter referred to as the detector). The detector detects radiation dose data and transmits the data to the controller wirelessly or via wired transmission, displaying the detected data and its status. This system is suitable for radiation protection and safety monitoring in X-ray and gamma-ray environments. Depending on the monitoring needs of the application site, a high-sensitivity detector or a high-range detector can be selected. It is an ideal instrument for X-ray and gamma-ray radiation monitoring in radiation source application sites such as industrial radioactive source application sites, environmental laboratories, irradiation rooms, nuclear medicine, nuclear material storage and transportation, and security inspection.

RDU57 Controller Performance and Parameters:

Display: 5.7-inch LCD graphic display with a user-friendly interface;

Processor: Industrial-grade 32-bit ARM processor with digital input/output ports and a real-time clock function;

Detector Communication Interface: Wireless (optional), RS485;

External Detector Quantity: 64 channels, maximum 128 channels (optional);

Host Computer Communication Interface: The controller and host computer can be connected via Ethernet or RS232 to form a large-scale regional radiation monitoring network, expandable to GPRS/3G;

Alarm Functions and Alarm Thresholds: Customizable, with upper and lower limit alarm functions and a switch output port;

Abnormal States: Dose rate exceeding threshold, detector malfunction, detector blockage (overload);

Alarm Method: Can be expanded with an intelligent audible and visual alarm device, display and audible/visual: 110dB/m, 150R/min (customizable);

Data Storage: SDHC card, maximum support 32G, storage interval adjustable;

Power Supply: DC 9～36V or AC 110～260V 50Hz

Operating Environment: Temperature -10℃~55℃, Relative Humidity ≤85%RH (+40℃);
Dimensions and Weight: Controller: 310mm*200mm*80mm, Weight: 1.5KG;
Protection Rating: IP55;
RP32GM Detector Performance and Parameters:

1. Detector: High-efficiency GM detector, high sensitivity, fast response speed

2. Measurement Range: Background ~ 100mSv/h

3. Response Time: Based on the sliding measurement method according to the radiation intensity measurement time, the protection alarm response time is <2 seconds

4. Relative Error: Relative basic error ≤10% within the measurement range

5. Energy Response: 40keV～1.5MeV

6. Alarm Method: Arbitrarily set upper and lower limit alarm thresholds, sensor fault alarm

7. Wide Power Supply Range: DC 9～36V or AC 110～260V 50Hz
8. Operating environment: Temperature -10℃～+50℃, relative humidity (at 40℃) ≤98%
9. Protection level: IP65
10. Transmission method: Built-in 485 industrial bus interface, can be connected to the control host and the host computer monitoring platform via ZigBee mesh and TCP/IP protocol, and can remotely read the instrument's real-time dose rate and set instrument parameters (optional)
RP30NP detector technical specifications:
Detection rays: X, γ rays, H*(10);
Detector type: NaI+PMT (Ф30*25mm); Measurement range: 0.05μSv/h~600μSv/h; Energy range: 36keV~3MeV; Dose rate linearity: ±20% across the entire measurement range (calibrated with Cs-137); Overload resistance: 50 times the maximum dose rate; Alarm threshold: Continuously adjustable across the entire measurement range; Data interface: DB9, maximum transmission length 800 meters, compatible with RCS software; Temperature range: Operating temperature: -30℃~+50℃; Storage temperature: -40℃~+70℃; Relative humidity: 0~85% (RH); Power supply requirements: DC 9V~36V; Dimensions: Diameter 50mm, Length 420mm; Weight: Approximately 300g;